Efficacy of Acid-treated Sawdust in Decolourization of Tanning Wastewater

Efficacy of Acid-treated Sawdust in Decolourization of Tanning Wastewater


DOI: 

https://doi.org/10.30564/jees.v3i2.3699

Abstract

Colour removal from dye-bearing effluent is a serious challenge due to the difficulty in treating such wastewater by conventional treatment methods. The present investigation explores the decolourization of contaminated wastewater using acid-activated sawdust as an adsorbent. The physicochemical properties of wastewater samples labelled A, B, and C vizaverage temperature; pH; electrical conductivity; and total dissolved solids were determined using standard methods to be 302.63; 6.1; 284.47 µS/cm;35116.66 mg/L respectively. Colour removal efficiency of the adsorbent was studied under variable conditions (contact time, rate of agitation,loading). Experimental results demonstrated that the sawdust adsorbent has a significant capacity for colour removal from tannery effluent. There was significant variation in the absorbance of the treated samples. Adsorbent dose, stirring rate, and contact time were found to be directly proportional to colour removal while pH variation of the samples show that the effluents became less alkaline (slightly acidic) after decolourization.

Keywords: 

Wastewater, Acid-modification, Sawdust, Physicochemical properties

Comments

Popular posts from this blog

Impact of Polymer Coating on the Flexural Strength and Deflection Characteristics of Fiber-Reinforced Concrete Beams

Achieving Sustainable Use and Management of Water Resources for Irrigation in Nigeria

Soil Bunds Effect on Soil Properties under Different Topographies of the Southwest Ethiopia